Hot Water System Sydney

Maxa Distribution Australia is a reputable Sydney hot water system provider. We offer unmatched competence and dedication to heat pump sales and installation with over two decades of experience. Our company provides customized Sydney hot water systems for commercial, industrial, and domestic use. We are happy to work with top manufacturers, including our Italian heat pump and air conditioning supplier with over 30 years of expertise.

HWA1-A/H INVERTER HEAT PUMP

Air-cooled reversible heat pump for outdoor installation

The HWA1-A and HWA1-A / H series of air-cooled chillers and heat pumps are designed to provide cooling and heating for water. These chillers and heat pumps have a high efficiency. With profiles made of steel sheets that have been polyester powder coated or hot-dipped galvanised, they are durable enough to endure the elements. In order to fulfil all of the system needs in commercial, residential, and industrial buildings, these units are available in a total of 24 sizes, including 12 chillers and 12 heat pumps.

HWA-A/H INVERTER HEAT PUMP

Air-cooled liquid chillers and heat pumps with axial fans

As a result of the partialization with six to ten phases, the new multi-compressor chiller line does not require any water tanks. The management software is responsible for managing the working cycle of the compressors in accordance with the load requirements. It also allows the compressors to start in a different order to ensure that they operate for the same amount of hours. They are placed on rubber shock absorbers and come equipped with an internal overheat prevention system as well as a crankcase warmer, in case it is required.

HWA1-A INVERTER HEAT PUMP

Air-cooled water refrigerator and heat pump units

Air cooled liquid refrigerators and reversible heat pumps, with scroll compressors, axial fans with inverter control (except cooling only version), high performance plate heat exchanger, circulating pump, connectable with Hi-Touch remote controller. Models widely used for replacing old units or to be installed on new systems.

I-MAX INVERTER HEAT PUMP

Inverter refrigerators and heat pumps with dual refrigerant circuit

The i-MAX series reverse cycle heat pumps are designed for applications in commercial and industrial sectors, and can operate in heat pump mode with the possibility of producing hot water at a temperature up to 65°C for environmental heating and/or domestic uses.

I-32V5 INVERTER HEAT PUMP

Invertor monolock heat pump

The most compact and best performing on the market, the i-32V5 reverse cycle heat pumps have 12 models and are designed for residential and commercial applications. They are extremely versatile and can provide domestic hot water at 58°C (up to 63° with the help of auxiliary electric heater), and chilled water for summer cooling. The new i-32V5 system is the ideal solution to match with radiant/fan coil systems, with power supply from electricity network and/or from renewable sources.

ATRIA INVERTER HEAT PUMP

Hybrid system with heat pump and boiler

The Atria hybrid system is made of a heat pump and a condensation boiler, expressly designed by the manufacturer in order to make them work together. Offers a high-performance level and an eco-friendly choice decreases the carbon dioxide emissions. Atria’s range is ideal for domestic/residential installation, especially when substituting an existing system.

I-290 INVERTER HEAT PUMP

Invertor monolock heat pump

The MAXA range of heat pumps with the new R290 natural refrigerant gas is the widest and most complete in the market. The range includes 9 different sizes from 6 kW up to 27 kW in heating mode. A range of accessories and fittings allow for customisation of the unit to meet your specific needs. The 78°C maximum water temperature achievable by the i290 range allows easy integration into heating and sanitary hot water systems.

I-HPV5H INVERTER HEAT PUMP

Air/water inverter heat pumps with axial fan

New Air/Water heat pump with DC inverter technology and low GWP R32 refrigerant for outdoor installation. The range consists of 4 models with DC inverter compressors of hermetic scroll type specifically designed for operation with R32. The fan is of axial type with airfoil blades, specially shaped to increase the efficiency and reduce noise with electric motor driven in modulation with directly coupled brushless EC motor.

I-32V5C INVERTER HEAT PUMP

Invertor monolock refrigerators

The i-32V5C Midi air-water chillers represent an innovative solution in the chiller range for both comfort and process applications. The great flexibility of equipment combined with the “FULL INVERTER” nature of the series and a unique form factor make the Midi series integrable into any system. The basic version allows to reach a minimum water temperature of +5°C, while in the BT (low temperature) configuration this value can be reduced to -8°C.

I-32V5H INVERTER HEAT PUMP

Monolock heat pump and refrigerators

The i-32V5H MIDI reverse cycle heat pumps are designed for residential and commercial applications. They are extremely versatile and designed to produce hot water for winter heating, domestic hot water heating at 58°C (up to 63° with the aid of electric resistance), and cold water for summer cooling. The new i-32V5 MIDI system is the ideal solution in combination with radiant floor/fan coil systems, with electricity supplied from the network and/or from renewable sources.

HCN

Modular terminal units slim/reduced

The basic units are supplied without air filter in order to allow the customer to choose between the available filtering sections as accessories; even the remote control is an accessory. It has a self-supporting structure made of galvanized sheet with thermal and acoustic insulation (version S) or sandwich double panels 20mm thick with outer painted sheet; with ceiling/wall mounting holes, of contained dimensions and optimized encumbrance. Drain pan made with dual slope. Heat exchange coils with high efficiency made of copper tubes and aluminium fins, standard connections are located on the right side. Centrifugal fans with double air inlet aluminium blades of large diameter with 3-speed, mounted on elastic supports and dampers.

HCNA

Medium ductable terminal units with Brushless DC and AC asynchronous motor

The HCNA are small air handling units, which can be freely configured. It is possible to select between 2 motors (6 Poles or Brushless), 2 types of housing cases (S or D), the version of 2/4 pipes and a wide range of coupled accessories. The wide flexibility combined with the full range of capacity rating is the HCNA winning idea that allows to find the best solution for suiting your needs.

OTA1 40÷500

Aluminium horizontal crossflow heat recovery

Useful for air renewal, energy recovery and natural dehumidification, the OTA1 and OTAE1 perform heat recovery via a cross-flow heat exchanger for sensible heat only. The fan motor is of the three-speed type with an AC motor for the OTA1 version, while in the OTAE1 version the motor is of the EC type driven with a 0-10V signal. The air taken from the outside is filtered before release into the environment to further guarantee better air quality.

OTA1 MICRO E

EC Horizontal heat recovery units in paper with EC fan motors

Useful for air renewal, energy recovery and natural dehumidification, the OTA1 micro E performs heat recovery via an enthalpy type cross-flow heat exchanger which is able to recover both sensible and latent heat. The fan motor is of the EC Brushless type. The air taken from the outside is filtered before being released into the environment to further guarantee better air quality.

OTA-RHP 35÷450

Heat recovery unit with reversible heat pump

PUFFROLLER

Optimal for the storage of chilled and hot water

The Puffroller range provides an additional volume of system water to systems equipped with a heat pump. The construction characteristics of the storage and the external insulation make the Puffroller suitable to contain both hot water for heating and cold water for cooling. The wide range of capacities available allows you to always have the most suitable model for your specific system requirements.

CADDY

Tank for heating water with innovative thermic chimney and incorporated sanitary exchanger

The Caddy range of technical storage tanks allows various energy sources to be integrated into the same tank, in order to be able to produce domestic hot water instantly. The operating principle is based on the presence of several heat exchangers. In the upper part there is a finned exchanger immersed in the technical water. A second exchanger, located in the lower part of the storage tank, is dedicated to the energy exchange. Finally, the entire volume of the tank consists of technical hot water, which is usually kept at temperature by the heat pump.

BARREL

DHW boiler with internal treatment and pipe coil for heat pump

The Barrel range is one of the most useful devices to be installed for a complete hydronic heat pump system. The main use of the Barrel is the preparation and storage of hot water for domestic sanitary use. The steel tank is treated with a vitrification process that makes it perfectly suitable for storing hot water inside. Inside the boiler, a heat exchanger with a volume and surface area suitable for use with the heat pump is installed. The wide range of capacities available allows you to always have the most suitable model for your specific system requirements.

Why Choose Maxa Distribution Australia for Hot Water Systems?

Sydney’s varied climate requires flexible hot water systems. Maxa Distribution Australia understands the need for dependable, energy-efficient heating solutions that meet your needs. Why are we trusted?

1. Unmatched Heat Pump Knowledge
Our decades of selling and installing heat pumps have given us extensive knowledge of heating technology. We provide revolutionary heat pump systems for energy-efficient hot water, lowering business and residential expenditures.

2. Quality Commitment
Our Italian partner is known for high-tech heat pumps and AC systems. We guarantee our systems’ reliability, durability, and efficiency with thorough quality inspections.

3. Wide Selection of Hot Water Systems
We have several alternatives, from modest systems for small businesses to massive industrial solutions. We offer the right product for updating or installing a Sydney water heater.

4. Sustainability and Energy Efficiency
Our heat pump systems are energy-efficient to support Sydney’s sustainability efforts. Maxa Distribution Australia offers eco-friendly solutions that maximize performance and reduce carbon emissions.

Benefits of Sydney Heat Pumps for Hot Water

Modern heat pumps provide hot water effectively and sustainably. Why many Sydney residents and companies choose them:

Energy Savings
Heat pumps use ambient air to heat water, saving energy over electric water heaters. This results in lower power expenses and long-term savings.

Eco-friendly operation
Heat pumps reduce greenhouse gas emissions using renewable energy, making Sydney greener.

Dependable Results
In Sydney’s changing climate, heat pumps work at different temperatures. They guarantee hot water year-round.

Cost-Effectiveness
Heat pumps may cost more upfront, but they save money on energy over time, making them a good investment for many houses and companies.

Hot Water System Applications in Sydney: Residential

Sydney homes use efficient hot water systems for bathing, cooking, and cleaning. Families like our small, quiet, energy-efficient home heat pumps.

Commercial Use
Restaurants, hotels, and offices need reliable hot water systems to run efficiently. Our commercial-grade heat pumps provide high-capacity heating with low energy use, optimizing company performance.

Industrial Use
Warehouses, factories, and other industrial locations need durable hot water systems for diverse activities. Maxa Distribution Australia’s industrial heat pumps easily tackle demanding applications.

Why Sydney Customers Trust Maxa Distribution Australia Personalized Service

At Maxa Distribution Australia, customer satisfaction is our goal. Our staff collaborates with you to choose your area’s optimum hot water system.

Complete Solutions
We provide product selection, installation, and maintenance to guarantee your hot water system runs well. Our professional personnel handle all installation and maintenance tasks.

Affordable Prices
Our goal is value for money. With our affordably priced hot water systems, you get the finest solution within your budget.

Dependable Support
Our professional support team is here to answer any questions. We’ll assist you in choosing a system and provide post-installation support.

Sydney Hot Water System FAQs:

1. What is the lifetime of a heat pump system?
A well-maintained heat pump may last 15-20 years, making it a solid household or business investment.

2. Are heat pump hot water systems noisy?
No, contemporary heat pumps run silently to minimize your home or office interruption.

3. Can I put a heat pump in an existing home?
Our staff can retrofit a heat pump system into your home for compatibility and efficiency.

4. Do Sydney government incentives exist for energy-efficient system installations?
There are rebates and incentives for energy-efficient solutions. Our experts can help with eligibility and application.

Sydney residents can trust Maxa Distribution Australia for reliable hot water systems. We address your heating needs while meeting Sydney’s environmental goals with a record of quality, energy efficiency, and customer satisfaction.

Discover our hot water systems and learn how we can help you achieve dependable and energy-efficient hot water solutions. Maxa Distribution Australia combines quality and innovation.

Switch to hot water system! Contact a specialist today to find the best fit for you.